https://www.robolabor.ee/homelab/ 2026-04-17T21:47:09+00:00 https://www.robolabor.ee/homelab/ https://www.robolabor.ee/homelab/lib/tpl/arctic/images/favicon.ico text/html 2020-07-20T12:00:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.robolabor.ee/homelab/en/iot-open/remotelab/sut/color?rev=1595235600&do=diff VREL #6: Color Temperature and Brightness Compensation Laboratory The laboratory is located at Silesian Technical University, Poland, Gliwice Akademicka 16, room 319. Introduction The lab consists of two light sources placed on top of the pyramid-shaped tower (figure text/html 2020-07-20T12:00:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.robolabor.ee/homelab/en/iot-open/remotelab/sut/fan?rev=1595235600&do=diff Fan Synchronisation Laboratory The laboratory is located at Silesian Technical University, Poland, Gliwice Akademicka street number 16, room 320. Introduction The lab consists of two fans, a laser light source, two photocells, semi-transparent mirrors, and microprocessor system for control all of elements. Laser beam can pass thru fans, if propellers are in proper positions. Generally user can observe the transition by camera or photocells (for better accuracy). text/html 2021-06-11T12:00:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.robolabor.ee/homelab/en/iot-open/remotelab/sut/generalpurpose?rev=1623402000&do=diff VREL #2 and #4: General Purpose IoT Laboratory, air pushing nodes 2 and 4 The laboratory is located at Silesian Technical University, Poland, Gliwice Akademicka 16, room 310. Introduction The node is an airflow generator, connected to the appropriate air receiving node. There is an air duct that connects nodes (node 2 send air to node 1, while node 4 send air to node 3). The lab consists of the fan which is a source of airflow going to the air duct. The beam of the airflow can be regulated in… text/html 2021-06-11T12:00:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.robolabor.ee/homelab/en/iot-open/remotelab/sut/generalpurpose2?rev=1623402000&do=diff VREL #1 and #3: General Purpose IoT Laboratory, air receiving nodes 1 and 3 The laboratory is located at Silesian University of Technology, Gliwice, Poland, Akademicka 16, room 310. There are two nodes of this kind: Node 1 and 3, one per two air ducts, constituting a pair of working devices along with Nodes 2 and 4 respectively. text/html 2021-06-11T12:00:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.robolabor.ee/homelab/en/iot-open/remotelab/sut/generalpurpose3?rev=1623402000&do=diff VREL #8 through #11: General Purpose IoT Laboratory with air chamber for pressure monitoring The laboratory is located at Silesian University of Technology, Gliwice, Poland, Akademicka 16, room 316 There are four nodes of this kind: Node 8,9,10 and 11. Nodes may look different, in particular, nodes 8 and 10 are a mirror to the 9 and 11. text/html 2021-06-11T12:00:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.robolabor.ee/homelab/en/iot-open/remotelab/sut/roboarm?rev=1623402000&do=diff VREL #5: Roboarm IoT Laboratory The laboratory is located at Silesian Technical University, Poland, Gliwice Akademicka 16, room 310. Introduction The lab consists of a mechanical robot arm with two degrees of freedom. Using two actuators user can change the position of the arm, especially, can move the tail section of the arm, at beside ground of the node. For a better impression on the ground, there are bricks on the rail, which can be pushed with the robotic arm left and right. You can obse… text/html 2020-07-20T12:00:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.robolabor.ee/homelab/en/iot-open/remotelab/sut/rooftop?rev=1595235600&do=diff VREL #7: RoofTop Thermo Laboratory - intelligent house and heating management The laboratory is located at Silesian Technical University, Poland, Gliwice on the roof of building at Akademicka street number 16. The roof is 38 meters above ground level. (255 meters above sea level). It is one of the highest places in the nearest area. text/html 2020-07-20T12:00:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.robolabor.ee/homelab/en/iot-open/remotelab/sut/rooftop.u6?rev=1595235600&do=diff U6: Give few words about this scenario. Provide some objectives and impact on the students. Target group This hands-on lab guide is intended for the Beginners/Undergraduates/Masters/Professionals. Choose appropriate. Prerequisites Provide prerequisite readings/hardware/software/software libraries/skills if other than stated in the Laboratory Description. If none, remove along with the header. Please note some of those may be common for all scenarios (i.e. MQTT library), so provide it in the… text/html 2020-07-20T12:00:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.robolabor.ee/homelab/en/iot-open/remotelab/sut/rooftop.u10?rev=1595235600&do=diff U10: Give few words about this scenario. Provide some objectives and impact on the students. Target group This hands-on lab guide is intended for the Beginners/Undergraduates/Masters/Professionals. Choose appropriate. Prerequisites Provide prerequisite readings/hardware/software/software libraries/skills if other than stated in the Laboratory Description. If none, remove along with the header. Please note some of those may be common for all scenarios (i.e. MQTT library), so provide it in th… text/html 2021-11-07T12:00:00+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.robolabor.ee/homelab/en/iot-open/remotelab/sut/scenariosheader?rev=1636279200&do=diff Hands-on lab scenarios for SUT VREL nodes A table below presents a relation between SUT's IOT VREL nodes and their capabilities to handle presented hands-on-labs scenarios. Please be aware that scenarios are strictly related to the hardware, thus using an inappropriate scenario in the context of the VREL node that presents incompatible hardware may lead to the inability to obtain desired results or even to the hardware damage.